Screening glass powder with EVERSUN glass powder sieving machine

Screening glass powder with EVERSUN glass powder sieving machine

This article mainly introduces the characteristics of glass powder and what kind of sieving machine is used to screen glass powder.

Glass powder is an easy-to-grind, highly scratch-resistant, transparent powder with small particle size, good dispersibility, high transparency, and good anti-settling effect. After multiple surface improvements, it has good affinity and has a strong position. Resistance, can be easily dispersed in the coating, can increase the fullness of the coating after film formation, crystal transparent primers made, not only maintain the transparency of the varnish, but also provide good sanding. Glass powder is mainly used as a crystal primer in the production of high-grade furniture in coatings. It is also widely used as a dual-purpose primer for decoration. The recommended addition ratio is 5% -10%. Glass powder is widely used in modern times. Average particle size: 2.5 ± 0.5um. In the process of glass powder production, it is often necessary to use a vibrating screener to remove impurities, classify and screen glass powder. According to the characteristics of glass powder, the manufacturers of EVERSUN sieving machine recommend that you use glass powder ultrasonic sieving machine.

Glass powder

According to the above introduction, it is not difficult to see that glass powder has characteristics such as strong adsorption, easy agglomeration, high static electricity, high precision, high density, and light specific gravity. Because the ordinary vibrating screen uses the eccentric block of the vibration motor to drive the physical vibration of the screen above and below the screen for screening. It cannot solve the sieve blockage caused by the characteristics of fine particles such as adsorption, static electricity, and light weight. Therefore, an external force is needed to process the fine particles to solve the screening problems such as adsorption, static electricity, and light weight. The glass powder ultrasonic vibrating screen is to convert 220V, 50Hz or 110V, 60Hz electric energy into 18KHz high-frequency electric energy, input the ultrasonic transducer, and turn it into 18KHz mechanical vibration, so as to solve the adsorption of fine particles, static electricity, light weight, etc. The screening problems brought by the characteristics can achieve the purpose of efficient screening and net cleaning.

The characteristics of glass powder ultrasonic vibrating screen:

1. While achieving high precision and high mesh screening, control a narrow range of particle size.
2. It can be used in single and multiple layers. A set of intelligent ultrasonic generators can use three transducers at the same time.
3. Thorough sieve self-cleaning function: more than 500 mesh sieving, no mesh blocking phenomenon and no screening efficiency attenuation.
4. Really solve the screening problems such as strong adsorption, easy agglomeration, high static electricity, high precision, high density, and light specific gravity.
5. Ensure that the characteristics of the processed materials remain unchanged.
6. No pollution of powders such as bouncing balls to powder;
7. Screening accuracy can be increased by 1-70% compared with ordinary vibrating screen, and the output can be increased by 0.5-10 times.
8. Ultrasonic vibrating screen power supply can choose intermittent or continuous working in 2 working modes. The voltage adopts integrated circuit board, fully enclosed design, and digital CPU precise control.
9. The power of the power supply can be automatically adjusted between 18K-40K. The low frequency can be converted to high frequency according to the specific gravity of the material. The transducer can work continuously for 12-24 hours.

Eversun machinery (Henan)Co,.Ltd was established in 2003, Eversun Machinery is a professional manufacturer of screening and conveying equipment, product quality system has been strictly certified by ISO9001:2005 and CE national standards.