EVERSUN cam tozu eleme makinesi ile cam tozu eleme
This article mainly introduces the characteristics of glass powder and what kind of eleme makinesi is used to screen glass powder.
Cam tozu kolay öğütülebilen bir tozdur., çizilmeye karşı son derece dayanıklı, küçük parçacık boyutuna sahip şeffaf toz, iyi dağılabilirlik, Cam tozu üretim sürecinde eleme makinesi uygulaması Cam tozu, cilalanması kolay ve çizilmeye karşı dayanıklı, oldukça şeffaf bir tozdur., Cam tozu üretim sürecinde eleme makinesi uygulaması Cam tozu, cilalanması kolay ve çizilmeye karşı dayanıklı, oldukça şeffaf bir tozdur.. After multiple surface improvements, it has good affinity and has a strong position. Resistance, can be easily dispersed in the coating, can increase the fullness of the coating after film formation, crystal transparent primers made, not only maintain the transparency of the varnish, but also provide good sanding. Glass powder is mainly used as a crystal primer in the production of high-grade furniture in coatings. It is also widely used as a dual-purpose primer for decoration. The recommended addition ratio is 5% -10%. Glass powder is widely used in modern times. Average particle size: 2.5 ± 0.5um. In the process of glass powder production, it is often necessary to use a vibrating screener to remove impurities, classify and screen glass powder. According to the characteristics of glass powder, the manufacturers of EVERSUN eleme makinesi recommend that you use glass powder Ultrasonik eleme makinesinden.
According to the above introduction, it is not difficult to see that glass powder has characteristics such as strong adsorption, kolay yığılma, yüksek statik elektrik, yüksek hassasiyet, yüksek yoğunluklu, ve ışık özgül ağırlık. Because the ordinary vibrating screen uses the eccentric block of the vibration motor to drive the physical vibration of the screen above and below the screen for screening. It cannot solve the sieve blockage caused by the characteristics of fine particles such as adsorption, Statik elektrik, and light weight. Öyleyse, an external force is needed to process the fine particles to solve the screening problems such as adsorption, Statik elektrik, and light weight. The glass powder ultrasonic vibrating screen 220V dönüştürmektir, 50Hz veya 110V, 6018KHz yüksek frekanslı elektrik enerjisine Hz elektrik enerjisi, input the ultrasonic transducer, and turn it into 18KHz mechanical vibration, so as to solve the adsorption of fine particles, Statik elektrik, hafif, vesaire. The screening problems brought by the characteristics can achieve the purpose of efficient screening and net cleaning.
The characteristics of glass powder ultrasonic vibrating screen:
- While achieving high precision and high mesh screening, control a narrow range of particle size.
- It can be used in single and multiple layers. A set of intelligent ultrasonic generators can use three transducers at the same time.
- Thorough sieve self-cleaning function: daha fazla 500 mesh sieving, no mesh blocking phenomenon and no screening efficiency attenuation.
- Really solve the screening problems such as strong adsorption, kolay yığılma, yüksek statik elektrik, yüksek hassasiyet, yüksek yoğunluklu, ve ışık özgül ağırlık.
- İşlenen malzemelerin özelliklerinin değişmeden kalmasını sağlayın.
- No pollution of powders such as bouncing balls to powder;
- Screening accuracy can be increased by 1-70% compared with ordinary vibrating screen, ve çıkış arttırılabilir 0.5-10 zamanlar.
- Ultrasonik titreşimli elek power supply can choose intermittent or continuous working in 2 working modes. The voltage adopts integrated circuit board, fully enclosed design, and digital CPU precise control.
- The power of the power supply can be automatically adjusted between 18K-40K. The low frequency can be converted to high frequency according to the specific gravity of the material. The transducer can work continuously for 12-24 saatler.
Eversun makineleri (Henan)eş,.Ltd kuruldu 2003, Eversun Makine eleme ve ekipmanı taşıma profesyonel bir üreticisidir, ürün kalite sistemi kesinlikle ISO9001 tarafından onaylanmıştır:2005 ve CE ulusal standartlar.
Ana ürün vardır eleme makinesi, Vibro filtresi, Ultrasonik titreşimli elek, Vakum konveyör, Dumpting istasyon, Tumbler screener, Industrial'in eleme makinesi, Sıvı filtresi, Gyratory titreşimli elek, vidalı konveyör ve benzeri.
Herhangi bir desteğe ihtiyacınız olursa lütfen bizimle iletişime geçmekten çekinmeyin.
Satış Departmanı: Sales@vibrosievingmachine.com, Cell/WhatsApp:+86 13162301696