Analysis of the causes of clogging of rotary vibrating screen
The rotary vibrating screen is a high-precision fine powder screening machine. It has low noise and high efficiency. It takes 3-5 minutes to change the screen quickly. It has a fully enclosed structure and is suitable for screening and filtering materials such as granules, powder and slime. The rotary vibrating screen is a vertical motor as the excitation source. The eccentric weights are installed on the upper and lower ends of the motor to convert the rotary motion of the motor into three-dimensional motion of horizontal, vertical and tilt, and then transmit this motion to the screen surface.
The influence of the phase angle of the rotary vibrating screen on the screening effect
During the normal operation of the rotary vibrating screen, due to the various characteristics of the materials, different shapes will cause various forms of screen hole blockage. The main reasons for the blockage are as follows:
- Spherical particles or materials with multiple contact points to the mesh;
- More flake particles;
- Contain a large number of particles close to the separation point;
- Materials with fibrous materials;
- The water content of the material is high;
Most of the particles are irregular, so there are many reasons for the clogging of the rotary vibrating screen.
EVERSUN machinery (Henan)Co,.Ltd was established in 2003, EVERSN Machinery is a professional manufacturer of screening and conveying equipment, product quality system has been strictly certified by ISO9001:2005 and CE national standards.
Our main product are Sieving machine, Vibro sifter machine, Ultrasonic sieving machine, Vacuum conveyor, Dumping station, Tumbler screening machine, Industrial sieving machine, Liquid filter, Rectangular gyratory sifter, Screw conveyor and etc.
Please feel free to contact us if you need any support.
Sales Dep: Sales@vibrosievingmachine.com, Cell/WhatsApp:+86 13162301696