气动真空上料机出现故障怎么办?
这 气动真空输送机 uses compressed air to generate high vacuum through a vacuum generator to realize the conveying of materials, 气动真空上料机出现故障怎么办. 气动真空上料机出现故障怎么办, 等等. The high vacuum generated by the vacuum generator eliminates the layering phenomenon of the conveyed materials and ensures the uniformity of the composition of the mixture. And other mechanical automatic feeding equipment.
When the compressed air is supplied to the vacuum generator, the vacuum generator will generate negative pressure to form a vacuum airflow, and the material will be sucked into the suction nozzle to form a material airflow, which will reach the silo of the feeder through the suction pipe. 过滤器将物料与空气完全隔离. 真空输送机为什么会出现故障, 控制器将自动切断气源, 真空发生器将停止工作, 料仓门将自动打开, 真空输送机为什么会出现故障, 真空输送机为什么会出现故障. When the time is over or the material level sensor sends out the feeding signal, 真空输送机为什么会出现故障. The machine uses high-pressure air to blow back, which can instantly shake off the powder, so that it maintains a good effect.
当。。。的时候 气动真空输送机 fails, the treatment methods are as follows:
If the feeding machine fails to feed or the feeding capacity is low, please check according to the following procedures.
- Whether the air supply pressure of the system reaches 0.5-0.6Mpa. Air supply pressure refers to the air pressure in the system when the vacuum generator is working.
- Whether the discharge door is tight.
- After a long time of use, a certain thickness of powder accumulates on the discharge door, which causes the door to not close tightly and leaks vacuum. The discharge door should be cleaned. The sealing rubber ring of the discharge door is worn, causing the door to close loosely and leaking vacuum. The sealing ring should be replaced. If the output and stroke of the cylinder are faulty, the cylinder should be replaced.
- Filter is clogged. After blowing the filter clean with compressed air, blow back the filter with your mouth. If it is smooth, the filter is not blocked; if you feel suffocated, the filter has been blocked. Put it in an ultrasonic cleaner for more than 30 分钟.
- The suction tube is blocked by a large piece of material. It often occurs at the entrance of the stainless steel suction nozzle and the entrance of the vacuum hopper.
- The clamps between the pump head and the hopper and between the sections of the hopper are not tightened, causing the system to leak air, unable to feed materials or reducing the feeding capacity.
- The backflush system has failed. The compressed air pulses stored in the air bag back-blow the filter each time the 真空输送机 discharges to ensure that there is only a thin layer of powder on the surface of the filter. If the backflushing system fails, thick powder will accumulate on the surface of the filter, increasing the resistance and causing the vacuum feeder to fail to feed. 是一种依靠真空泵的吸力，专门输送颗粒和粉状物料的机械设备, the backflushing valve should be replaced.
所以在喂食过程中不会有粘性 (河南)有限公司,.有限公司成立于 2003, Eversun Machinery是筛分和输送设备的专业制造商, 产品质量体系已通过ISO9001严格认证:2005 和CE国家标准.
我们的主要产品是筛分机, 振动过滤器, 超声波振动筛, 真空输送机, Dumpting station etc
EVERSUN 机械提供了一个 4 层滚筒筛分机的解决方案.
销售部: Sales@vibrosievingmachine.com, Cell/WhatsApp:+86 13162301696
