Phương pháp cho ăn màn hình rung
1. Manual feeding
Manual feeding is the manually shoveling material directly into the vibrating screen inlet. Nếu đạt được việc cấp liệu đồng đều cho màn hình rung, việc cho ăn bằng tay cần phải được bỏ đi.
2. Conveyor feeding
Use screw conveyors, máy hút chân không, sàng-nghiền mịn, and other conveying machinery to feed materials. The more commonly used conveyor equipment is the screw conveyor and the vacuum feeder, and the belt conveyor is rarely used because the hygienic and environmental protection conditions cannot be met. Both the screw conveyor and the vacuum feeder can intelligently set the timing and size of the feeding amount, which meets the needs of the vibrating screen for uniform feeding.
The above is the analysis of how the vibrating screen feeds evenly. It can be found that adding a gate device (for manual feeding mode) at the feeding port, selecting conveyor feeding, and adding a separator device can achieve uniform feeding of the vibrating screen. If the feeding of the vibrating screen is not uniform, the screening efficiency and accuracy will be reduced, and the maintenance cost will also be greatly increased. Vì thế, it is necessary to ensure that the feeding of the vibrating screen is uniform and strictly follows the operating instructions of the corresponding vibrating screen to save trouble and improve Productivity.
Máy móc Eversun (Hà Nam) Công ty, TNHH Được thành lập tại 2003, Eversun Machinery là nhà sản xuất chuyên nghiệp các thiết bị sàng lọc và vận chuyển, hệ thống chất lượng sản phẩm đã được chứng nhận nghiêm ngặt bởi ISO 9001:2005 và tiêu chuẩn quốc gia CE.
Sản phẩm chính của chúng tôi là máy sàng, Máy sàng Vibro, Siêu âm màn hình rung, băng tải chân không, trạm bán phá giá, Máy trộn ruy băng, Máy đóng gói túi số lượng lớn.
Máy móc EVERSUN cung cấp một giải pháp với Máy sàng lọc Tumbler 4 tầng
Phòng kinh doanh: Sales@vibrosievingmachine.com, Cell/WhatsApp:+86 13162301696