Titreşimli elek besleme yöntemi
1. Manual feeding
Manual feeding is the manually shoveling material directly into the vibrating screen inlet. Titreşimli eleğin düzgün beslenmesi sağlanacaksa, elle beslemeden vazgeçilmesi gerekiyor.
2. Conveyor feeding
Use screw conveyors, vakum besleyiciler, Bantlı konveyörler, and other conveying machinery to feed materials. The more commonly used conveyor equipment is the screw conveyor and the vacuum feeder, and the belt conveyor is rarely used because the hygienic and environmental protection conditions cannot be met. Both the screw conveyor and the vacuum feeder can intelligently set the timing and size of the feeding amount, which meets the needs of the vibrating screen for uniform feeding.
The above is the analysis of how the vibrating screen feeds evenly. It can be found that adding a gate device (for manual feeding mode) at the feeding port, selecting conveyor feeding, and adding a separator device can achieve uniform feeding of the vibrating screen. If the feeding of the vibrating screen is not uniform, the screening efficiency and accuracy will be reduced, and the maintenance cost will also be greatly increased. Öyleyse, it is necessary to ensure that the feeding of the vibrating screen is uniform and strictly follows the operating instructions of the corresponding vibrating screen to save trouble and improve Productivity.
Eversun Makina (Henan) Şti., Ltd. was established in 2003, Eversun Makine eleme ve ekipmanı taşıma profesyonel bir üreticisidir, ürün kalite sistemi kesinlikle ISO9001 tarafından onaylanmıştır:2005 ve CE ulusal standartlar.
Our main products are eleme makinesi, titreşimli elek, Ultrasonik titreşimli elek, Vakum konveyör, damping istasyon, Şerit karıştırıcı, Toplu çanta paketleme makinesi.
Herhangi bir desteğe ihtiyacınız olursa lütfen bizimle iletişime geçmekten çekinmeyin
Satış Departmanı: Sales@vibrosievingmachine.com, Cell/WhatsApp:+86 13162301696
