Test operation of 둥근 분리기
Usually some customers don’t know how to operate after receiving the machine. EVERSUN 기계가 테스트 절차를 설명합니다..
- 전원 스위치를 끕니다, 그리고 그것을 위해 그것을 실행하십시오 20-30 아무런 조작없이 분. 일반적으로, the motor should run counterclockwise. If the direction is wrong, adjust the three-phase power supply.
- It should be confirmed that the vibration motor is running within the rated current range. At the beginning of operation, especially in low temperature occasions, the current will be slightly higher, but within 20-30 분, it should be reduced to the rated current value.
- There should be no abnormal sound on the 둥근 분리기. If there is an abnormal sound, it should be quickly turned off for inspection. The abnormal sound is usually caused by loosening of the fastening components. Especially during transportation and assembly after disassembly, please pay attention to the fastening of each part. 그만큼 둥근 분리기 has an instantaneous resonance zone (1-3 초) when it starts and stops. 이때, the amplitude and noise will increase significantly, which is normal.
- After idling, a small amount of material can enter the screen through the feed port, and then slowly increase to the required tolerable feed amount. 이때, the weight should be adjusted according to the net surface discharge to make the efficiency of the screening machine reach the best state.
우리의 주요 제품은 체질 기계입니다,진동 체로 기계,초음파 체질 기계,진공 컨베이어,덤프 스테이션, 텀블러 선별기, 산업용 체질 기계, 액체 필터, 직사각형 선회 체, 스크류 컨베이어 등.
지원이 필요하시면 언제든지 연락주세요..
영업부: Sales@vibrosievingmachine.com, Cell/WhatsApp:+86 13162301696