선형 진동 스크린의 모델을 선택하는 방법 당신에게 맞는 선형 진동 스크린의 모델을 선택하는 방법
V형 믹서 series products are high-efficiency asymmetric mixers, 화학 물질에 분말 또는 입상 물질을 혼합하는 데 적합합니다., 식품, 약, 밥을 먹이다, 세라믹, 야금 및 기타 산업. 슬러지 건조기는 합리적인 구조를 가지고 있습니다., 간단한 조작, 밀폐 작동, V형 믹서. The cylinder (manual or vacuum feeding) is made of stainless steel, V형 믹서. It is one of the basic equipment of the enterprise.
Before using the V형 믹서, add oil to the place to be refueled, and then perform no-load operation to check whether the fasteners are loose, whether the electrical is normal, and whether the machinery is running normally. If there is any abnormality, refurbish and debug. Place the V-type mixer smoothly, install the machine feet, and level it so that the machine can run freely.Turn the feeding port to the top, open the feeding cover to feed, and the feeding amount should not exceed the specified volume, then close the feeding cover and start the machine to run. If an abnormality is found on the way, it must be shut down for inspection. The inside and outside of the hopper must be rinsed clean when changing varieties.
Under the condition of working with materials, first open the feeding port of the mixer, and acknowledge whether the discharge port is closed or not, and put a regular amount of material into the v-shaped hopper according to the technical control requirements.At the end of the feeding, 재료와 함께 작동 중일 때 먼저 믹서의 공급 포트를 엽니다., the feeding port must be closed and locked.
Next is the time when the V형 믹서 is working. Turn on the power button, 재료와 함께 작동 중일 때 먼저 믹서의 공급 포트를 엽니다., activate the reverse button of the mixer, and adjust the motor speed to 600r/min for mixing within the rotational speed of the technical regulations.When the mixing material reaches the technical rules, stop by adjusting the motor speed button. 재료와 함께 작동 중일 때 먼저 믹서의 공급 포트를 엽니다., make the discharge port of the mixing machine face the ground, and adjust the adjustment motor speed button to 0. The v-type mixer will stop the button. Rotate to the right to block the power supply.
One end of the V-type mixer is equipped with a motor and a reducer. V형 믹서, and the reducer is transmitted to the V-shaped barrel through a coupling. The V-shaped barrels are operated in series, V형 믹서, 하위, V형 믹서.
그만큼 V형 믹서 undergoes deceleration to organize the rotation of the rotating cylinder, and uses the asymmetry formed by the unequal length of the two cylinders of the mixer to mix. When the mixer moves, the material changes from differentiation to combination because of the difference in potential energy. A horizontal force pushes materials to communicate horizontally.
When the materials change from combination to differentiation, because the material planes are different, a horizontal force is generated and the materials are pushed to communicate horizontally.
The cylinder rotates once, so that about 25% of the material flows from one cylinder to another; when the cylinder rotates together, the material is moved radially, so that the material is divided horizontally and radially, and the combination replacement proceeds, following the cylinder Continuously rotating and changing the position, the material of the V-shaped cylinder is repeatedly dislocated, translated, dispersed, and then uniformly mixed.
우리의 주요 제품은 체질 기계입니다,진동 체로 기계,초음파 체질 기계,진공 컨베이어,덤프 스테이션,텀블러 선별기, 산업용 체질 기계, 액체 필터, 직사각형 선회 체, 스크류 컨베이어 등.
지원이 필요하시면 언제든지 연락주세요..
영업부: Sales@vibrosievingmachine.com, Cell/WhatsApp:+86 13162301696