ceramsite 모래 회전 체 기계는 화면을 어떻게 변경합니까??
Ceramsite 모래는 세라믹 입자입니다, 그리고 더 미세한 것을 모래라고 합니다., 석유 파쇄 프로판트로도 알려져 있습니다. 대부분의 외관 특징은 원형 또는 타원형 구체입니다., but some imitation crushed stone ceramsites are irregularly crushed.The appearance and color of ceramsite varies with the raw materials and processes used.The color of roasted ceramsite is mostly dark red, ocher red, and some special varieties are gray-yellow, gray-black, gray-white, blue-gray, 등. The particle size of ceramsite is generally 5-20mm, and the largest particle size is 25mm. Ceramsite is generally used to replace gravel and pebbles in concrete.
In the oil brick well industry, the accuracy of ceramsite sand is above 98%, which requires the use of a large-output and high-precision screening equipment-gyratory sifter machine.
Working principle of gyratory sifter machine
The basic rotary motion is similar to manual screening.The eccentricity is adjustable from 25 to 40mm, and the low-speed V-belt drive is adjustable from 120 ...에 360 rpm. The residence time of each product can be adjusted in the direction of the drive axis through the radial and cutting angle of the tumbler screener.Therefore, the horizontal and throwing three-dimensional tumbling movement is established.The material is evenly dispersed on the entire screen surface from the center to the outer edge, so as to propagate axially in a spiral motion.The fine particles thus complete the entire screening process.
How to replace the screen of the ceramsite sand gyratory sifter machine
After a long time use of the gyratory sifter machine, due to wear and tear, it will affect the screening efficiency. 이때, the screen should be replaced in time. When designing the gyratory sifter machine, taking into account the improvement of equipment maintenance efficiency and the humanization of the screen replacement process design, the screen replacement can be completed in a short time.
Replacement steps:
- Open the sieve plate of the gyratory sifter machinebox, check the broken sieve and pull out the sieve along the U-shaped card slot, with even force on both sides.
- Remove the broken screen on the screen frame, and lay a new screen on the screen frame. Pay attention to flat and tension the screen, and then fix the screen.
- The two people work evenly together, and re-feed the screen along the U-shaped slot into the screen box to check the installation status of the screen to prevent distortion.
- Assemble the sieve plate of the sieve box, pay attention to check the tightness, and test the machine.
The above is the working principle of the ceramsite sand gyratory sifter machine and the way of replacing the screen.
우리의 주요 제품은 체질 기계입니다,진동 체로 기계,초음파 체질 기계,진공 컨베이어,덤프 스테이션,텀블러 선별기, 산업용 체질 기계, 액체 필터, 직사각형 선회 체, 스크류 컨베이어 등.
지원이 필요하시면 언제든지 연락주세요..
영업부: Sales@vibrosievingmachine.com, Cell/WhatsApp:+86 13162301696