多層線形振動ふるい
多層線形振動スクリーンの原理と機能:
EVERSUNリニア振動ふるい 2つの振動モーターで構成されています, ふるい箱, スクリーンメッシュ, 振動吸収体と振動減衰装置. 優れた水平モーターを動力源として、直線的に前進しながら画面上で素材をふるいにかけます。. グレーディングを実現するために、単層または多層のスクリーンを装備できます, 不純物除去, 粉末除去, 検査, 洗浄, 脱水症およびその他の目的.
多層の設置と調整 線形振動スクリーン:
- モーターは振動に固定する必要があります, 振動板の表面は滑らかで平らでなければなりません.
- モーターは横置き可能.
3, モーターには信頼できる接地が必要です, モーターには接地装置があります, リードエンドにはマークがあります, 足のしっかりしたアンカーで接地することもできます.
- 加振力の調整.
日常のメンテナンス 多層線形振動ふるい分け機:
- 始める前に: 粗いメッシュと細かいメッシュが損傷していないかどうかを確認します, リングの各バンドルがロックされているかどうか.
- 起動時: 異音がないか注意する, whether the current is stable, and whether the vibration is abnormal.
- After use: Clean up after each use.
Use and maintenance of multi-layer linear vibrating screen:
- Electrical protection devices should be installed.
- At the beginning of the operation, check the anchor bolts at least once a day to prevent loosening.
- The motor should be well lubricated. Lithium-based grease should be replenished for about two weeks. (When refueling, add an appropriate amount of lithium-based grease through the oil cup.
- After the machine has been running for 1500 hours, the bearing should be inspected and replaced if there is serious damage.
- When the machine is parked for a long time and then used again, the insulation resistance should be measured for 500 volt megohmmeter measurement, which should be greater than 0.5 megohm.
スペースダスト濃度が特定の密度に達すると (河南)Co,.株式会社 に設立されました 2003, Eversun Machineryは、スクリーニングおよび搬送装置の専門メーカーです。, 製品品質システムはISO9001によって厳密に認定されています:2005 およびCEの国内規格. スペースダスト濃度が特定の密度に達すると, スペースダスト濃度が特定の密度に達すると, 超音波振動スクリーン, 真空コンベヤー, スペースダスト濃度が特定の密度に達すると.
サポートが必要な場合は、お気軽にお問い合わせください.
スペースダスト濃度が特定の密度に達すると: Sales@vibrosieveingmachine.com, Cell/WhatsApp:+86 13162301696