Metode pengumpanan layar getar
1. Manual feeding
Manual feeding is the manually shoveling material directly into the vibrating screen inlet. Jika pengumpanan seragam pada layar getar ingin dicapai, pemberian makanan secara manual perlu ditinggalkan.
2. Conveyor feeding
Use screw conveyors, pengumpan vakum, konveyor sabuk, and other conveying machinery to feed materials. The more commonly used conveyor equipment is the screw conveyor and the vacuum feeder, and the belt conveyor is rarely used because the hygienic and environmental protection conditions cannot be met. Both the screw conveyor and the vacuum feeder can intelligently set the timing and size of the feeding amount, which meets the needs of the vibrating screen for uniform feeding.
The above is the analysis of how the vibrating screen feeds evenly. It can be found that adding a gate device (for manual feeding mode) at the feeding port, selecting conveyor feeding, and adding a separator device can achieve uniform feeding of the vibrating screen. If the feeding of the vibrating screen is not uniform, the screening efficiency and accuracy will be reduced, and the maintenance cost will also be greatly increased. Karena itu, it is necessary to ensure that the feeding of the vibrating screen is uniform and strictly follows the operating instructions of the corresponding vibrating screen to save trouble and improve Productivity.
Mesin Eversun (Henan) Bersama., Ltd didirikan pada 2003, Eversun Machinery adalah produsen peralatan penyaringan dan pengangkutan profesional, sistem mutu produk telah disertifikasi secara ketat oleh ISO9001:2005 dan standar nasional CE.
Our main products are Mesin pengayak, saringan vibro, Layar bergetar ultrasonik, Konveyor vakum, Stasiun pembuangan, Pengaduk pita, Mesin pengemas kantong curah.
Jangan ragu untuk menghubungi kami jika Anda membutuhkan dukungan apapun
Departemen Penjualan: Sales@vibrosievingmachine.com, Cell/WhatsApp:+86 13162301696
