Test operation of Layar Getar Mesin Pengayak Bubuk Kakao
Usually some customers don’t know how to operate after receiving the machine. Mesin EVERSUN akan menjelaskan prosedur pengujian untuk Anda.
- Matikan sakelar daya, dan kemudian jalankan untuk 20-30 menit tanpa operasi apapun. Biasanya, motor harus berjalan berlawanan arah jarum jam. If the direction is wrong, adjust the three-phase power supply.
- It should be confirmed that the vibration motor is running within the rated current range. At the beginning of operation, especially in low temperature occasions, the current will be slightly higher, but within 20-30 menit, it should be reduced to the rated current value.
- There should be no abnormal sound on the Layar Getar Mesin Pengayak Bubuk Kakao. If there is an abnormal sound, it should be quickly turned off for inspection. The abnormal sound is usually caused by loosening of the fastening components. Especially during transportation and assembly after disassembly, please pay attention to the fastening of each part. Itu Layar Getar Mesin Pengayak Bubuk Kakao has an instantaneous resonance zone (1-3 detik) when it starts and stops. Pada saat ini, the amplitude and noise will increase significantly, which is normal.
- After idling, a small amount of material can enter the screen through the feed port, and then slowly increase to the required tolerable feed amount. Pada saat ini, the weight should be adjusted according to the net surface discharge to make the efficiency of the screening machine reach the best state.
Produk utama kami adalah mesin pengayak,Mesin ayakan vibro,Mesin pengayak ultrasonik,Konveyor vakum,Stasiun pembuangan, Mesin penyaringan tumbler, Mesin pengayak industri, Filter cairan, Ayakan putar persegi panjang, Konveyor sekrup dan lain-lain.
Jangan ragu untuk menghubungi kami jika Anda membutuhkan dukungan apapun.
Departemen Penjualan: Sales@vibrosievingmachine.com, Cell/WhatsApp:+86 13162301696