Prinsip pencampur tiga dimensi
The principle of the mixer tiga dimensi is mainly accomplished by the motor and the reducer.The mixing cylinder is connected with the ends of the main and driven shafts by two Y-shaped universal suspension devices. The two universal joints are intersected and perpendicular to each other in space.When the drive shaft is dragged and rotated, the universal joint causes the cylinder to move, rotate and roll in space.The material in the three-dimensional mixer barrel follows the axial, radial and annular three-dimensional resurrection movement, called the three-dimensional motion mixer, referred to as the three-dimensional mixer.Through the three-direction rotation mixing makes a variety of materials in the cylinder flow doping, and finally mixed evenly.
3Mesin pengaduk D. in operation, because the mixing barrel body has multi-direction operation, so that all kinds of materials in the mixing process, accelerate the flow and diffusion, while avoiding the general mixing machine due to centrifugal force produced by the material gravity segregation and accumulation phenomenon, mixing no dead Angle, can effectively ensure the quality of mixed materials.
Features of three-dimensional mixer:
1.Short mixing time and high efficiency;
2. The mixed preparation is stable, no stratification and segregation
3mesin d-powder-mixer
3. Mixing no dead Angle, can effectively ensure the quality of mixed materials;
4.The machine has a set of motor and cycloidal pin transmission reducer to complete its autobiography and revolution;
5.Significant energy saving effect, the energy consumption of the machine is only 1/10 compared with that of the drum mixer;
6. The three-dimensional mixer equipment by the frame transmission system, electrical control system, multi-direction movement mechanism;
7.The wear and pressure feed of granular materials are small, and the heat sensitive materials are mixed without overheating reaction;
8. Advanced structure, pengoperasian yang mudah, operasi yang aman dan andal, cantilever double helical shaft without bottom bearing, it eliminates the failure caused by the powder seepage of the bottom bearing;
9.Unique design of three-dimensional mixer equipment, fine polishing of the inner wall of the barrel, no dead Angle, no pollution of materials,convenient discharging, easy cleaning and simple operation, dll.;
10. The machine is sealed and dust-free, operasi sederhana, perawatan yang nyaman, long service life.In addition, according to user requirements, can be made into a pressure vessel for pressure or vacuum operation;
11. Mixing speed is fast, and the quality is uniform.The machine double helix is asymmetrical arrangement, one large and one small to expand the mixing range, so it is more suitable for the material mixing with a large proportion of different mixing ratio;
12.Three-dimensional mixer equipment has multi-direction movement, so that the material in the barrel body cross mixing points, mixing effect is high, the uniformity can reach more than 99.9%, the maximum loading coefficient can reach 0.9(ordinary mixer is 0.4~0.6);
Mesin Eversun (Henan)Bersama,.Ltd didirikan pada 2003, Eversun Machinery adalah produsen peralatan penyaringan dan pengangkutan profesional, sistem mutu produk telah disertifikasi secara ketat oleh ISO9001:2005 dan standar nasional CE.
Produk utama kami adalah mesin pengayak, Filter getaran, Layar bergetar ultrasonik, Konveyor vakum, Stasiun pembuangan,
Jangan ragu untuk menghubungi kami jika Anda membutuhkan dukungan apapun.
Departemen Penjualan: Sales@vibrosievingmachine.com, Cell/WhatsApp:+86 13162301696
