Die Arbeitsvorteile des Bandmischers

Ribbon mixer is a new type of high-efficiency, hochpräzise Mischausrüstung, in Pestiziden verwendet, Tierarzneimittel, Lebensmittel, Chemikalien, Biologie, Aquakultur, Keramik, Feuerfest, Kunststoffe, Mehrnährstoffdünger und andere feste Pulver, Feststoff-Schlamm-Mischen, besonders geeignet zum Mischen von viskosen Materialien.

The operating principle of the ribbon mixer is that a double-layered helical blade is arranged on the main shaft of the drive, the inner screw conveys the material to the outside, and the outer screw gathers the material to the inside. Under the convective movement of the double-layer spiral belt, the material forms a low-power and high-efficiency mixing environment. The inner and outer diameter screws installed on the stirring shaft drive the material in the barrel, so that the agitator can turn the material in the barrel to the greatest extent. When the stirring device is working, Die innere Schraube treibt das Material nahe an die Achse, um die Achse zu drehen, and the axial direction is pushed from the inside to both sides. It can be uniformly mixed in a short time.

Ribbon mixer has the following advantages

1. Convenience in cleaning: To meet the needs of each batch and each shift to clean and clean the inside of the equipment in a timely, convenient and fast manner, leaving no dead ends.
2. High mixing uniformity: It can evenly mix materials with a ratio of 1:10000, especially for materials with larger specific gravity characteristics. The user has done a field test, Mischen 1,000 kilograms of flour with about 5 kilograms of red powder within 10 Protokoll. After sampling and testing at each corner, the mixing uniformity is very high.
3. The mixing speed is fast and the efficiency is high: Usually, the mixing of each batch of materials is generally fully mixed and stirred in 1-10 Protokoll, welches ist 6-10 times more efficient than other mixers.
4. Fast and convenient discharge: usually a batch of materials is finished in 1-2 Protokoll. In the user’s field test, the discharge time of 1000 kg of flour was 47 seconds.
5. Large loading capacity: The equipment usually has a loading capacity (loading coefficient) of more than 70%.
6. Less residual amount: users always think that the residual amount of horizontal equipment is large, but this is not the case. Because of the gap between the outer screw belt and the U-shaped cylinder wall, we have made it very small during the processing process, and the screw belt has been running when the material is discharged. , so that the material moves in the direction of the discharge valve, and basically all light is emitted. 1000 kg of flour remained at 5 kg in the user’s field test.
7. It can meet the requirements of vacuum feeding and no dust discharge, and avoid dust flying during the whole feeding, mixing and discharging process.
8. The mixing process is mild, and the original state of the material is basically not destroyed.
9. No pollution to the material: the stirring mechanism of the equipment is integral, sicher und zuverlässig, and all the edge and corner welds are smooth and easy to clean; the lubricating part is outside the barrel, no dripping oil and abrasive debris penetrate into the material, and it can be sealed Operation, isolate the dust in the air from entering the material.
10. Low height requirements for workshops: the equipment is Horizontalmischer, and various forms of drive devices and discharge positions can be selected arbitrarily, regardless of the height of the workshop and the floor space.
11. The equipment runs smoothly and reliably, with few wearing parts, lange Lebensdauer, convenient maintenance and simple operation.

Eversun Maschinen (Henan)Co.,.Ltd wurde gegründet in 2003, Eversun Machinery ist ein professioneller Hersteller von Sieb- und Fördergeräten, Das Produktqualitätssystem wurde streng nach ISO9001 zertifiziert:2005 und nationale CE-Normen.

Unser Hauptprodukt sind Siebmaschinen, Vibrationsfilter, Ultraschall-Schwingsieb, Vakuumförder, Dumpting Station,

Bitte zögern Sie nicht uns zu kontaktieren, wenn Sie Unterstützung benötigen.

Vertriebsabteilung: Sales@vibrosievingmachine.com, Cell/WhatsApp:+86 13162301696