Bedienung des V-Mischers
Bandmixer is a high-efficiency ultra-fine grinding equipment, die in Farben verwendet wurde, Tinten, Pigmente, Papierbeschichtungen, Keramikglasuren, magnetische Materialien, Kunststofffüllstoffe, Funktionsmaterialien, und schwer zu behandelnde Goldminen. Aber wie man den V-Typ-Mixer bedient?
V-type mixer series products are V-type high-efficiency asymmetric mixers, die sich zum Mischen von Pulver- oder Granulaten in Chemikalien eignen, Lebensmittel, Medizin, Futter, Keramik, metallurgy and other occupations.The machine has a reasonable structure, einfache Struktur, closed operation, convenient feeding and discharging, and the cylinder body is made of stainless steel material, das leicht zu reinigen ist. It is one of the basic equipment of the enterprise.One end of the Bandmixer is equipped with a motor and a reducer. The power of the motor is transmitted to the reducer through a belt, and the reducer is transmitted to the V-shaped barrel through the United Nations.Make the V-shaped barrels work in succession, and the materials in the moving barrel are mixed up, Nieder, left and right in the barrel.
To use the Bandmixer, first open the feed port of the mixer when it is running with materials, and confirm whether the discharge port is closed or not, and put a regular amount of material into the V-type hopper according to the technical control requirements.At the end of the feeding, in order to avoid the material flowing out during mixing, the feeding port must be closed and locked.Next is the time when the V-type mixer is working, turn on the power button, turn the stop button to the left, start the reverse button of the mixer, and adjust the motor speed to 600r/min within the technical regulations.
After the mixing reaches the technical rules, stop the machine by adjusting the motor speed button. When stopping, place the mixing machine’s discharge port directly on the ground, and adjust the adjustment motor speed button to 0. Das Bandmixer will move the stop button to the 0 position. Rotate to the right to cut off the power.The final is the discharge: open the feeding port of the V-type mixer, and use a regular container to load at the discharge port until the material in the hopper is discharged.
Unser Hauptprodukt sind Siebmaschinen,Vibrationssiebmaschine,Ultraschall-Siebmaschine,Vakuumförder,Dumpstation,Tumbler-Siebmaschine, Industrielle Siebmaschine, Flüssigkeitsfilter, Rechteckiges Kreiselsieb, Schneckenförderer und etc.
Bitte zögern Sie nicht uns zu kontaktieren, wenn Sie Unterstützung benötigen.
Vertriebsabteilung: Sales@vibrosievingmachine.com, Cell/WhatsApp:+86 13162301696