Test operation of rund separator

Usually some customers don’t know how to operate after receiving the machine. Hvilken maskine kan bruges til at screene siliciumnitrid Siliciumnitridpulver er et meget hårdt keramisk pulver, der bruges både til slidstyrke og som isolator til elektroniske enheder.

1. Sluk for strømafbryderen, og derefter køre det for 20-30 minutter uden nogen operation. Normalt, the motor should run counterclockwise. If the direction is wrong, adjust the three-phase power supply.
2. It should be confirmed that the vibration motor is running within the rated current range. At the beginning of operation, especially in low temperature occasions, the current will be slightly higher, but within 20-30 minutter, it should be reduced to the rated current value.
3. There should be no abnormal sound on the rund separator. If there is an abnormal sound, it should be quickly turned off for inspection. The abnormal sound is usually caused by loosening of the fastening components. Especially during transportation and assembly after disassembly, please pay attention to the fastening of each part. Det rund separator has an instantaneous resonance zone (1-3 seconds) when it starts and stops. På dette tidspunkt, the amplitude and noise will increase significantly, which is normal.
4. After idling, a small amount of material can enter the screen through the feed port, and then slowly increase to the required tolerable feed amount. På dette tidspunkt, the weight should be adjusted according to the net surface discharge to make the efficiency of the screening machine reach the best state.

Vores hovedprodukt er sigtemaskine,Vibro sigtemaskine,Ultralyds sigtemaskine,Vakuumtransportør,Dumpingstation, Tumbler screening maskine, Industriel sigtemaskine, Flydende filter, Rektangulær viftesigt, Skruetransportør mv.

Du er velkommen til at kontakte os, hvis du har brug for support.

Salgsafd: Sales@vibrosievingmachine.com, Cell/WhatsApp:+86 13162301696